Category: Engineering Homework Help

I’m working on a information technology question and need an explanation to help me learn.

Questions to solve in the attached file.The solution is in the same file and send it again or in a speared word file.Please solve it without matching from websites, and stay away from similarity and plagiarism. This is an important condition in solving the file. Put the refrence for the answer in [APA] style

I’m working on a civil engineering multi-part question and need support to help me study.

Reinforced concrete beams and columns are produced in a precast factory. Concrete members will be heat treated after casting for a total period of 19 hours. Heat curing is designed to cover an initial delay period of 2 hours at 20 °C, heating for 3 hours to maximum temperature of 85 °C, keeping at maximum temperature for 9 hours and then cooling to 20 °C. Beams will be prestressed after heat curing when the concrete should reach to at least 30 % of its potential strength. Cylinder specimens are taken from the concrete mixture for determining the potential strength of concrete after curing them in water at 22 °C till testing at 28 days.

a) Draw temperature vs. time graph of curing procedure applied.

b) Calculate the cooling rate of the precast concrete members.

c) Calculate the strength gained by the concrete member members after heat curing for 19 hours.

d) Is this heat curing cycle appropriate for prestressing the beams 19 hours after casting? If not what most practical change would you propose for the heat curing cycle for the beams.

I’m working on a civil engineering question and need an explanation and answer to help me learn.

View the latest data map of sea level variations (available via the Sea Level icon). What areas of the globe are seeing the greatest rise in sea level (based on the OSTM imagery that loads)?

View the latest data map of carbon monoxide levels (available via the Carbon Monoxide icon). What areas of the globe are experiencing the highest levels of carbon monoxide (based on the AIRS imagery that loads)?

View the latest data map of daytime air temperatures (available via the Global Temperature icon). What areas of the globe are seeing the warmest temperatures during the day (based on the AIRS imagery that loads)?

Length of the report : Seven pages (minimum) or more
including figures, tables, equations, and references.
• Page layout: The report should be in standard IEEE conference/journal format. provide a MS Word template.

Report Outline/Table of Contents:
• Abstract and Introduction (Brief overview of the topic: problem area,
motivation, overview of the topic)
• Background (Literature search, key concepts, existing voids or weaknesses,
and resulting opportunity)
• Proposed approach to mitigate the drawbacks
• Results (Simulation, Hardware or any other results can be extracted from a
paper.)
• Conclusion and References in IEEE Format
• The report should be in IEEE single column or double column format. Double
column format word template will be available on canvas. If you desire, the
double column format can be converted to single column format using MS Word
formatting.

The ability to convey information, both orally and in writing, is a necessary skill for today’s workforce. In this activity, you will present your research findings. Your presentation must include a minimum of six slides but no more than eight. It must have embedded audio and include speaker notes.

Keep in mind that as a minimum your presentation must:

• Identify your research problem (with appropriate support).
• Explain why the problem is relevant.
• Identify the data you analyzed and what the results of that analysis revealed.
• Justify your recommendation.
• Include a reference slide.

I need support with this Information Technology question so I can learn better.

case study will be assessed as follows:
• Clarity: Are major points clearly presented? Does the writer present a coherent and succinct argument?
• Completeness: Are any points missing? Does the writing accomplish each task set forth in the assignment?
• Thoroughness: Are all major points illustrated adequately? Are there parts that need more explanation or evidence?
• Organization: Are the main points in the right order? Are there any overlapped or repeated points? Are there any irrelevant detail?
• Language: Are there problems with grammar, spelling, and punctuation? Are the sentences overly-complex? Choppy? Are the tone and word choice appropriate?

#1. What is Six Sigma – what does it mean mathematically? What tools, techniques, and methods that you would you traditionally use in a Six Sigma facilitation? What do you envision the roles and responsibilities for a Six Sigma centered project? Provide 8 Six Sigma tools and explain what they are used for.

#2. For this assignment, you have been assigned as the project manager for a project involving the installation of a new Internet security suite for your company.

Complete the following tasks for your project:

• Provide a brief overview of your project.
• Describe positive and negative risks within your project.
• Discuss how each of the identified risks can affect the success or failure of the project and rank each risk in terms of impact to the project.
• Propose risk mitigation and management approaches for each identified risk.
• Describe the role policy plays in the planning and performing of risk management processes.

7 Questions. Question 6 is written below this. The rest is screenshots provided below:

3.11. Valtec Electronics fills orders for its electronic components and

parts by truck to customers through several distribution centers. A

measure of its supply chain responsiveness is order fulfillment lead

time, which is the number of days from when a company receives an

order to when it is delivered to the customer. A distribution center

manager has taken 20 samples of five orders each during the month

and recorded the lead time for each as follows:

Samples Lead Time (Days)

1 1.3 2.4 0.7 3.0 1.8

2 2.1 1.2 1.0 2.5 3.6

3 4.2 3.3 2.6 1.5 3.0

4 1.6 2.1 2.8 0.9 1.5

5 2.6 3.0 1.4 4.6 1.9

6 0.8 2.7 5.8 3.7 4.5

7 2.6 3.5 3.1 3.6 1.4

8 3.4 6.1 1.5 2.5 2.8

9 3.1 2.5 2.2 2.9 1.8

10 2.4 4.8 5.9 3.2 4.4

11 1.9 2.7 3.4 2.2 0.4

12 6.1 4.9 2.1 3.6 5.2

13 1.2 3.4 2.8 2.3 4.5

14 2.4 2.9 3.4 2.3 2.5

15 3.7 7.0 1.4 2.4 3.3

16 3.6 2.7 4.8 2.0 1.7

17 0.4 1.8 6.5 3.2 4.8

18 5.3 2.9 3.4 4.8 4.4

19 2.7 3.6 2.9 4.1 5.2

20 4.7 2.0 2.0 3.1 1.8

Construct an _

x-chart to be used in conjunction with an R-chart using

3σ limits for these data and indicate if the process is in control.

I’m working on a engineering question and need support to help me learn.

Topic:Computer Network Security Attacks

You should have gathered a number of sources related to your topic. State you topic and problem you are addressing in your dissertation. What trends are you seeing in the research related to your topic? What gap in evidence have you identified so far?