Tag: Engineering

I need help with a Engineering question. All explanations and answers will be used to help me learn.

Write a short report of 350 word on given presentation of 50 min video 

Presentation links: 

Alternative option 1: watch

Alternative option 2: watch

Your report should include:

•At least one paragraph describing the content in the speaker’s presentation, and

•At least one paragraph describing how the presentation applies to your(First person) engineering career plan. 

Note: please use only one of the above presentation.

IT 341

undefined

Skills Exam II

undefined

Instructions:

undefined

You have been provided with the required addressing table and network topology in a pkt file. Follow the instructions and

undefined

Deliverables:

undefined

Zipped folder containing:

undefined

Device	Interface	IP Address	Subnet Mask	Default Gateway
R1	Gi0/0	11.11.11.1	255.255.255.0	NA
	S0/0/0	14.14.14.1	255.255.255.252	NA
	S0/0/1	12.12.12.1	255.255.255.252	NA
R2	S0/0/0	23.23.23.1	255.255.255.252	NA
	S0/0/1	12.12.12.2	255.255.255.252	NA
R3	Gi0/0	33.33.33.1	255.255.255.0	NA
	S0/0/0	23.23.23.2	255.255.255.252	NA
	S0/0/1	34.34.34.1	255.255.255.252	NA
R4	Gi0/0	44.44.44.1	255.255.255.0	NA
	S0/0/0	14.14.14.2	255.255.255.252	NA
	S0/0/1	34.34.34.2	255.255.255.252	NA
PC1	NA	11.11.11.2	255.255.255.0	11.11.11.1
PC3	NA	33.33.33.2	255.255.255.0	33.33.33.1
PC4	NA	44.44.44.2	255.255.255.0	44.44.44.1

undefined

Task 1: Configure Basic Device Settings (10 Points)

undefined

Step 1: Setup host name for the routers as given in the topology.

undefined

Step 2: Setup enable password: class

undefined

Step 3: Setup line console password: cisco

undefined

Task 2: Configure and verify OSPF Routing (40 Points)

undefined

Step 1: Configure OSPF as the routing protocol on all four routers and advertise the appropriate networks using the network statement. (hint: determine the connected networks for each router and advertise them through OSPF.) You need to use PROCESS ID: 100 and Area: 0 in your OSPF configurations. (15 points)

undefined

Step 2: Prevent routing updates on the interfaces of R1 on which routing advertisements are not required. (hint: you should use passive-interface command for the LAN interface.) (10 points)

undefined

Step 3: Verify that OSPF is running on the routers. Which command would you use to confirm that OSPF is running? (10 points)

undefined

Step 4: Examine the routing tables on all routers. What command should you use to examine the routing table content? (5 points)

undefined

Task 3: Configure Static Routing (30 Points)

undefined

Step 1: From R4 OSPF configuration, remove the LAN network 44.44.44.0/24.(5 points)

undefined

Step 2: Configure static routes on R1 and R2 to reach to network 44.44.44.0/24 with S0/0/0 as the next hop. (10 points)

undefined

Step 3: Configure static route on R3 to reach to network 44.44.44.0/24 with S0/0/1 as the next hop. (5 points)

undefined

Step 4: Verify the routing configuration by viewing the routing tables of R1, R2 and R3. How can you confirm from the routing tables that all static routes have been added correctly? (10 points)

undefined

Task 4: Saving your Configurations and Restart the Devices (5 Points)

undefined

• Save your configuration by using the proper save command on the routers. Now, click on ‘Power Cycle Devices’ to restart the network. Please make sure to save your configuration before restarting your devices.

undefined

Task 5: Verify Connectivity (15 points)

undefined

• To verify connectivity, you should be able to ping between all the devices.

undefined

From	To	Fail/Pass
PC1	PC3
PC1	PC4
PC3	PC4

I’m working on a information technology discussion question and need guidance to help me learn.

Question: In your opinion what is/are the most security threats that organizations will have to be prepared for 2020-2021 ?

In this laboratory project we are going to change the effective sampling rate of a discrete signal in order to directly observe the effects of the process both in the frequency domain and after continuous signal reconstruction. We will then design proper decimation and interpolation filters to ensure that the resampling process is completed successfully. We will also apply several nonlinear interpolators to the sampled signal to explore the effects on the reconstructed signal using these alternative methods.

Appendix C – Family Residences ( entire,p.p 1039-1074) the answer must be from the book, the PDF that attached.

The Reading Journal comprises your responses to these questions:

1. What are the most important ideas, requirements, techniques you learned from the reading?
2. What are the fundamental intentions implicit in these ideas, requirements, techniques?
3. How might the ideas, requirements, techniques, and underlying intentions relate to your work as a designer and/or contribute to your professionalism?

Requirements:

• Submissions may be in outline or narrative form.
• A minimum of one typed page in 12-point font; no maximum length.
• Include assignment title, week number, and your name.

Case Study Scenario: You are a cybersecurity analyst working at a prominent regional hospital. On Monday morning, the organization’s technology help desk received a call from Dr. John Beard, a long-time resident physician. Dr. Beard called them to report that his company laptop was stolen from his car after he stopped to work out at a local gym on his way home from the office. A representative from the help desk informed you of the theft and also mentioned that Dr. Beard stated that his laptop case contained a USB thumb drive that he purchased to “back up” important patient files he saved onto his laptop. Dr. Beard also revealed that his daily planner “might have” been in the bag, and that the planner had his hospital computer user name and password written on the back cover. Prior to ending the call, Dr. Beard told the representative that he would call her back if his daily planner turned up. As your conversation with the help desk representative wound down, she commented that Dr. Beard had many different computer “issues” that keep her team busy. She recalled talking to Dr. Beard about the hospital’s policy against accessing patient files remotely, and his annoyance with her inability to help him “get work done” while away from the hospital. And just a week ago, a junior member of her team completed a service ticket to reconfigure Dr. Beard’s laptop to grant him administrative rights. The service request stuck out because it did not have a “reason” indicated (a company policy requirement), but was still approved by James Davis, the hospital’s senior system administrator and close personal friend of Dr. Beard. 

Prompt:  After reading the scenario above, complete the Fundamental Security Design Principles mapping table in the Case Study Template and answer the short response questions. 

Specifically, you must address the critical elements listed below: I. Fundamental Security Design Principles Mapping: Fill in the table in the Module Two Case Study Template by completing the following steps for each control recommendation: A. Specify which Fundamental Security Design Principle best applies by marking all appropriate cells with an X. B. Indicate which security objective (confidentiality, availability, or integrity) best reflects your selected control recommendation. C. Explain your choices in one to two sentences, providing a selection-specific justification to support your decision. II. Short Response Questions: A. How might you work with someone like Dr. Beard to cultivate a security mind-set that is more in line with the organization’s ethical norms? Hint: Consider his attitude, his past behaviors, and his opinion about organizational policies. B. How would you help the hospital better secure its patient files? Make sure to incorporate at least one data state (data-at-rest, data-in-use, or data-in-motion) and one of the control recommendations from your completed table in your response. 

Explain clearly system engineering and pathways within MTC. Avoid copy from net and avoid explaining wrong things like writing about information system and architecture engineering, project management.

2) Your project is rescue bridge robot and we are using Lego robot EV3, if you write or mention different project such as Tour robot , Missile robot , fish robot , autonomous car , etc , you will fail the project part and you will get zero. Any other Irrelevant project will be zero as well

3) It was noticed that you are using a previous year 2019-2020 project and evaluation points, evaluation of rescue bridge robot was explained, you don’t need to mention evaluation points for other project or irrelevant to rescue bridge robot cause will be wrong and you will get zero again.

4) Your design bridge is from wood (bamboo and PINE) , any explanation for other design ( civil bridge , iron bridge , river bridge , isolated island bridge , any irrelevant bridge for our MTC4027 will be wrong ) and you will get zero mark.

5) You need to explain features of bridge drawing, just copy paste feature from net is not acceptable, and also you must show weight calculations and explain the good and bad about wood bridge design.

6) You are writing scientific report, references are expected to be within report ( minimum 6 ) and cited correctly within text.

7) Design cycle figure must be included and each step explained.

8) Don’t forget that you are using Solidwork, free cad, those are simulations software, mention importance of modeling and simulation in engineering design.

9) Follow the template you were given and answer all questions correctly- don’t delete any part of any question or heading, writing irrelevant information within text will lead you get zero. Also, ensure you write report by yourself because you are the one who attended the lab and know the project.

I’m working on a chemical engineering question and need support to help me learn.

Write four differences and four similarities between Prokaryotic & Eukaryotic cells.

Question 1

WP uniforms provides a selection of lab coats, shirts, trousers, uniforms, and outfits for area businesses. For a fee, WP uniforms will collect soiled garments once a week, wash and repair these garments, and return them the following week while picking up a new batch of soiled garments. At WP uniforms, shirts are laundered in large batches. From the laundry, these shirts are inspected, repaired, and sorted. To determine whether the process can be done more effectively, the employees stormed the following steps and placed them in order. Create a flowchart with their information. Remember to use symbols appropriately.

Shirts arrive from laundry.	Ask: is shirt beyond cost-effective repair?
Pull shirt from racks
Remove shirts from hangers.	Discard shirt if badly damaged.
Inspect.	Sort according to size.
Ask: does shirt have holes or other damage?	Fold shirt, place in proper storage area.
Make note of repair needs.	Make hourly count.

Question 2
Calculate the takt time for a company that works two 8-hour shifts per day. Each shift receives 30 minutes for a mid-shift meal and two 15-minute breaks. The customer would like to receive 25 generators per day.

Question3
Calculate the takt time for the one hour of provided system data?

1. 5 minutes
2. 1.8 minutes
3. 3 minutes
4. 2 minutes

Question 4

Describe an example of error proofing that you have implemented, provide pictures (if any). Writing about 50-75 words explaining on the problem and what you implemented.

Note: visual management is a popular tool with color, size, shape, and effects. This could be in your kitchen, garage, bedroom, bathroom, living room, or at your workplace.

Question 5

Describe the Kaizen concept and list the steps for a Kaizen project.

Question 6

Why does logistics play a key role in supply chain management? From a firm you have visited or worked with or from your research, describe the logistics activities and supply chain activities there, including who is involved and what they provide.